Using The Remote To Select An Audio Processor - RCA F32715 User Manual

Features and menus
Sound Logic™ Stereo Sound Logic technology monitors a
program's audio track and limits volume excursions to a minimum
and maximum volume range from the current volume setting.
Acting like a dynamic range, it compresses to limit sudden volume
increases, like when a commercial comes on.
Second Audio Program (SAP) Plays the program's audio in a
second language, if one is available. The TV displays the word SAP
when you tune to a program that is broadcast with SAP
information. SAP audio is broadcast in mono. SAP is also used to
broadcast a program's audio with descriptions of the video for the
visually impaired.
Audio Output & Speakers Displays a choice list that lets you turn the
TV's internal speakers on or off and set the audio outputs to fixed-level
or variable control level.
Variable Output, Speakers On This setting turns the TV's speakers
on and allows variable output from the TV's audio output jacks.
Variable Output, Speakers Off This setting turns the TV's
speakers off and allows variable output from the TV's audio output
jacks.
Fixed Output, Speakers Off This setting turns the TV's speakers
off and allows fixed output from the TV's audio output jacks to an
external device such as a surround sound amplifier. With Fixed
Output On, the TV's volume control, tone controls and mute are
disabled.
Using the Remote to Select an
Audio Processor
You can change the audio processor from the Audio menu, as illustrated
above, or by pressing the SOUND button on the remote. To make a
selection using the remote:
1. Press SOUND to display the audio processor choice list.
2. Point to and select a different audio processor or press CLEAR to
exit.
ON OFF
VCR1
DVD VCR2
MUTE
Sound button
SOUND
GUIDE
OK
MENU
WHO•INPUT
REVERSE PLAY FORWARD
REC•VCR+ STOP
PIP SWAP CH CTRL
TV
AUX SAT•CABLE
SKIP
GO BACK
INFO
CLEAR
ANTENNA
PAUSE
RESET
31