Cabling Direction - ABB ACS800-07-0610-3 Hardware Manual

24

Cabling direction

The drawing below shows the available power cabling directions of the drive. Note
that the desired cabling direction must be specified on ordering.
4 3
A B
2 1
Hardware description
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
3
6 6 8
C D
5 5 7
1
Description
1 Main supply – Bottom entry at each supply module (without load
switch-disconnector or air breaker)
2 Main supply – Bottom entry with load switch-disconnector or air
circuit breaker
3 Main supply – Top entry at each supply module (without load
switch-disconnector or air circuit breaker) (not for IP54)
4 Main supply – Top entry with load switch-disconnector or air
circuit breaker
5 Motor output – Bottom exit at each inverter module (without
common motor terminal cubicle)
6 Motor output – Top exit at each inverter module (without common
motor terminal cubicle). Added depth: 130 mm
7 Motor output – Bottom exit with common motor terminal cubicle
8 Motor output – Top exit with common motor terminal cubicle
A Load switch-disconnector or air circuit breaker cubicle (optional)
B Control, I/O and supply cubicle
C Inverter unit cubicle
D Common motor terminal cubicle (optional)