ABB ACS800-07-0610-3 Hardware Manual page 28

22
The following drawing represents a 2×D4 + 2×R8i drive with optional load switch-
disconnector.
9
No. Description
1 Supply (input) cable lead-throughs. Top entry optional.
2 Input busbars.
3 Load switch-disconnector.
4 Earthing/Grounding switch (optional).
5 AC fuses. Only present if the drive is equipped with a
load switch-disconnector or air circuit breaker.
6 Supply modules.
7 Chassis socket for quick supply module connection
(behind each module).
8 Supply module switch-disconnectors (coupled to an
operating handle on the cabinet door). Not present if the
drive is equipped with a load switch-disconnector or air
circuit breaker.
9 Supply unit control board (DSSB; mounted sideways).
Contains an actual value display and status LEDs.
Hardware description
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
17
4
15
3
2
16
1
5
8 8
7 7
6
No. Description
10 Inverter DC fuses.
11 Inverter modules.
12 Chassis socket for inverter module output connection
(behind each module).
13 Output terminals (behind each module). Motor cables
connect here if a common motor terminal cubicle is not
present.
14 Motor (output) cable lead-throughs. Not used if optional
common motor terminal cubicle is present.
15 Swing-out frame. Contains the drive control unit with I/O
terminals, and provides space for standard and optional
electrical equipment.
16 Auxiliary voltage transformer (accessible by opening the
swing-out frame).
17 Auxiliary voltage switch.
10
11
12 12
13 13
14 14