Faults And Alarms - Siemens SINAMICS G120 List Manual

Recommendation
Information about recommended settings.
Index
The name and meaning of each individual index is specified for indexed parameters.
The following applies to the values (Min, Max, Factory setting) of indexed adjustable
parameters:
• Min, Max:
• Factory setting:
Bit field
For parameters with bit fields, the following information is provided about each bit:
• Bit number and signal name
• Meaning for signal states 0 and 1
• Function diagram (FP) (optional).
Dependency
Conditions that must be fulfilled in conjunction with this parameter. Also includes special effects
that can occur between this parameter and others.
Where necessary, "Refer to:" indicates the following information:
• List of other relevant parameters to be considered.
• List of faults and alarms to be considered.
SINAMICS G120 Control Units CU240B-2/CU240E-2
List Manual (LH11), 01/2016, A5E33839529
The adjustment range and unit apply to all indices.
When all indices have the same factory setting, index 0 is specified with the unit to
represent all indices.
When the indices have different factory settings, they are all listed individually with the unit.
The signal is shown on this function diagram.
2 Parameters
2.1 Overview of parameters
21