Faults And Alarms - Siemens SINAMICS G120D CU240D-2 DP Manual

Bit field
For parameters with bit fields, the following information is provided about each bit:
• Bit number and signal name
• Meaning for signal states 0 and 1
• Function diagram (FP) (optional).
Dependency
Conditions that must be fulfilled in conjunction with this parameter. Also includes special effects
that can occur between this parameter and others.
Where necessary, "Refer to:" indicates the following information:
• List of other relevant parameters to be considered.
• List of faults and alarms to be considered.
Safety guidelines
Important information that must be observed to avoid the risk of physical injury or material
damage.
Information that must be observed to avoid any problems.
Information that the user may find useful.
Danger
Warning
Caution
Notice
Note
SINAMICS G120D
List Manual (LH14), 01/2016, A5E33842313
The signal is shown on this function diagram.
The description of this safety notice can be found at the beginning of this
manual, see "Legal information" (Page 4).
The description of this safety notice can be found at the beginning of this
manual, see "Legal information" (Page 4).
The description of this safety notice can be found at the beginning of this
manual, see "Legal information" (Page 4).
The description of this safety notice can be found at the beginning of this
manual, see "Legal information" (Page 4).
Information that the user may find useful.
2 Parameters
2.1 Overview of parameters
21