Table of Contents
Advertisement
10 Data Communication Problems
If no communication is accomplished with the system connector:
•
Make a general visual inspection for corrosion or oxidation from liquid damage
according to point 1.2.
•
Check that the system connector (Fig.10.1.) is incorrectly soldered, not mechanical
damaged, dirty or oxidized. Replace it if necessary.
If the fault still occurs, handle the unit according to the local company or the GSP directives.
4/00021-1/FEA 209 544/81 A
Sony Ericsson Mobile Communications AB
Fig.10.1
Trouble shooting Guide, SP/Mechanical
13(17)
Advertisement
Table of Contents
