Panasonic EP30006 Service Manual page 39

EP30006
10.15.3. Removing the Intensity sensor
1. Disconnect the Connectors on the Main PCB.
2. Cut two Insulated ties.
3. Unscrew one Screw.
Caution in assembly
- Put the swell parts of the Massage mechanism block frame to the hollow parts of the Intensity sensor. (Otherwise, it
may lead to the overrun in the direction of stronger.)
- When fixing the Lead wires with Insulated ties, move the Massage mechanism block in the directions of strong-weak
so as to check whether the Lead wires are pulled or hooked.
- 39 -
ORDER NO.HPD0709C21C1