EP30006
10.15. DISASSEMBLY AND ASSEMBLY OF MASSAGE MECHANISM BLOCK
10.15.1. DISASSEMBLY OF AIR UNIT
1.
Remove the Massage mechanism block from the Rear frame.
2.
Unscrew four Screws, and remove the PCB cover.
3.
Unscrew two Screws, two Brushclips, and four Install rubbers
on the Air unit.
4.
Unscrew seven Screws.
5.
Cut four Insulated ties.
6.
Unscrew four Screws and remove two Hoses, then you can
remove the internal parts.
Caution in assembly
Be sure not to make each Lead wires hooked in ribs when in
assembly.
- 37 -
ORDER NO.HPD0709C21C1