Intended Use; Items Supplied; Technical Data; Safety Information - Kompernass KH 4182 Operating Instructions Manual

Intended Use

This appliance is intended for use as il-
lumination for living areas in domestic
households and only in dry rooms. This
appliance is not intended for use as sole
illumination, for industrial or commercial
applications or for use in occupational
areas.
The warranty does not provide compen-
sation for damage caused by improper
use of the appliance!

Items supplied

1 Lamp base made of brushed metal
1 Lamp rod with 3 bulb holders
1 Shade retainer rod with end cap
1 Lampshade made of paper
1 Power cable with On/Off foot switch
3 Light bulbs
1 Operating manual

Technical data

Mains voltage:
Power cable length:
Protection class:
Bulb type:
Lamp base:

Safety instructions

• Do not permit children to handle elec-
trical appliances without supervision
- they cannot correctly assess the poten-
tial risks of injury.
• Check the appliance and all parts for
visible damages. Should the appli-
ance become damaged, immediately
remove the plug from the wall socket.
Then arrange for the appliance to be
checked by Customer Services.
230-240 V ~ 50Hz
approx. 2 m
II /
max. 3 x 40 W, E 14
approx. 24.5 cm Ø
Risk of electric shock.
• Connect the appliance only to electri-
cal wall sockets with a mains voltage
of 230-240 V ~ /50 Hz.
• Do not operate the appliance if the
power cable, the On/Off foot switch
or the plug are damaged. Arrange for
defective power cables and plugs to
be repaired or exchanged as soon as
possible by Customer Services.
• NEVER open the appliance. There are
no user-serviceable elements inside.
• NEVER submerse the appliance in
water. Wipe it only with a slightly
damp cloth.
• Protect the appliance against moisture.
Use it only in dry rooms, do not use it
outdoors or close to liquids.
• Ensure that the power cable can never
become wet or moist when in use or
that it could be damaged in any way.
• Notice regarding power disconnection
To completely disconnect the appliance
from mains power, the plug MUST
be removed from the power socket.
For this reason the appliance should
be placed in a position where un-
hindered access to the power socket
is assured at all times, so that in an
emergency the plug can be quickly
removed. To eliminate the risk of fire
you should completely disconnect the
plug from the wall socket if the appli-
ance is not going to be used for an
extended period, for example, during
holidays.
- 2 -