Structure Of Parameters; Changing A Parameter Value - Siemens sitrans LR 400 Instruction Manual And Users Manual

Structure of Parameters

Operation is hierarchically structured: the parameters are arranged in groups and
assigned a numerical menu identification (see example below).
Function group
2 Display
Function group
3 Diagnostics
Function group
4 Device data

Changing a Parameter Value

Selecting a Parameter Value from a List
In many cases, you can assign a parameter a value from a list of options.
You will see a single item of the selection list in the second line of the display.
• Press UP
Press RIGHT
the new setting, closes the input and returns to the next parameter level up.
• LEFT operates like a CANCEL key: When pressed, the device closes the
parameter input but keeps the originally displayed value. It does not save a changed
setting!
For an example of assigning a value from a selection list, see Operating Examples on
page 30.
Page 27
4. Device Data
1 Units
4. Device Data
2 Operating parameters
4. Device Data
3 Analog output
4. Device Data
3 Digital output
or DOWN to cycle through the list and choose the desired entry.
to assign the current entry to the parameter. The device accepts
SITRANS LR 400 – INSTRUCTION MANUAL
2. Display
1 Multi-display
2. Display
2 Level
2. Display
3 Volume
4.4 Digital output
1 Function DO
4.4 Digital output
2 Signal type DO
4.4 Digital output
3 Level parameters
7ML19985FH04