Raymarine Chartplotter Owner's Handbook Manual page 37

3-6
4. To edit the symbol, select EDIT SYMBOL.
5. Use trackpad left/right to highlight the required symbol , then press
ENTER.
ä To edit a waypoint using the Waypoint List:
1. From chart mode, press ENTER; the primary function bar is displayed.
2. Using trackpad left/right, select WAYPOINTS.
3. Select WAYPOINT LIST.
The Waypoint List is displayed, with its associated function bar:
4. Select EDIT WAYPOINT; the waypoint edit functions are displayed:
5. To edit the waypoint name, select EDIT NAME.
The cursor is placed in the name field of the selected waypoint.
Edit the name as previously described (up to eight characters).
6. Edit the waypoint symbol as previously described, using the cursor.
7. To change the waypoint's position, select EDIT POSITION. The cursor is
placed in the Position field in the Waypoint List .
• Use trackpad left/right to select the latitude/longitude fields.
• Use trackpad up/down to scroll through and edit the values.
8. When you have finished editing, press ENTER to save the new position.
RayChart 420/420D Chartplotter
D4674_1