Humidity; Mechanical Vibration; Ac Line Voltage Requirements - HP StorageWorks XP12000 Owner's Manual

Humidity

Mechanical vibration

AC line voltage requirements

38
Take care to protect the disk array from excessive humidity. You should
not observe condensation in or around the product under any conditions.
There is no procedure for recovery from moisture condensation.
Table 5. Humidity specifications
Humidity range type
Recommended operating humidity range at 22° C
(71° F)
Operating humidity range at 22° C (71° F)
Nonoperating humidity range
Shipping and storage humidity range (product
packed in factory packing)
Maximum operating acceleration is 0.05G at a frequency range of 10 to
300 Hz.
This section lists the AC power recommendations for each power cord.
Each DKC or DKU has two or four power cords. In case of a failure of the
power source for one cord, the power requirements, and therefore the
current requirement for the remaining power cord, will double.
For details on electrical specifications, cabling, and connectors, see the HP
StorageWorks XP12000 Disk Array Site Preparation Guide.
HP StorageWorks XP12000 Disk Array Owner's Guide
Noncondensing relative
humidity (RH)
50% to 55%
20% to 80%
8% to 90%
5% to 95%