Hotpoint LTF11M121OUK Service Information page 6

Indesit Company
CONSOLE PANEL
Select wash cycle button
ON-OFF/Reset button
and indicator light
Rinse aid indicator light
Wash cycle number and
remaining time indicator light
ON-OFF / Reset Button
Press this button to switch the appliance on.
To Reset a programme hold down the On/Off Reset button until the machine emits 1 long beep.
ON-OFF Indicator Light
This light informs that the dishwasher is on.
Wash Cycle Selector (P) Button
Each time this button is pressed the number in the display will sequence through the available
programmes.
Display
Located on the top of the console, it displays the following information:
• The set programme number during a Cycle
• The programme number flashing at the end of the cycle indicates the cycle is complete.
• If the on/off indicator is flashing as well as a number in the display, this indicates a fault
code.
• Low Rinse Aid Warning.
• Low Salt Warning.
• Delayed Time
• Basket Selected
Delayed Start Button
The Programme can be delayed between 1 and 12 hours.
Not compatible with all cycles.
Every time the Delay start button is pressed the next period of delay is hi lighted until the desired
time is displayed.
Multi Function Tablet Button
Button LED on when selected.
Selected when the customer is using Multi-Function Tablets. The Programme profile is altered
to make full use of the tablet.
Service Manual UK
Delayed start button
Salt indicator light
Zone Wash
indicator lights
Delayed start indicator light
6 of 40
Extra dry button
and indicator light
Zone Wash button
Multi-functional tablets
button and indicator light
Active Oxygen button
and indicator light
English