Prepare To Connect The Lp Cylinder - Weber Genesis 330 Owner's Manual

PREPARE TO CONNECT THE LP CYLINDER

The regulator must be secured to the side panel with the supplied hose retention
bracket .
Installation Inside of Cabinet
A) Open base cabinet doors .
B) Slide hose retention bracket (1) along hose to align with inside right panel front
mounting holes . Secure with two Phillips head screws/washers/bolts (2) .
m WARNING: The hose must be secured to the side panel with
the hose retention bracket. Failure to do so could cause
damage to the hose resulting in a fire or explosion, which
can cause serious bodily injury or death, and damage to
property.
Note: Be sure the cylinder brackets are installed in the base panel and the base of the
cylinder fits within the cylinder brackets.
Installation Outside of Cabinet
A) Open base cabinet doors .
B) Pass the regulator hose and hose retention bracket (1) out through the side panel
opening .
C) Align with side panel mounting holes located beneath the side panel opening .
Secure with two Phillips head screws/washers/bolts (2) .
m WARNING: The hose must be secured to the side panel with
the hose retention bracket. Failure to do so could cause
damage to the hose resulting in a fire or explosion, which
can cause serious bodily injury or death, and damage to
property.
◆
GAS INSTRUcTIONS
1
2
1
2
WWW.WEbER.cOm
® 11