The Learning Feature - Radio Shack TOUCHSCREEN REMOTE Owner's Manual

THE LEARNING FEATURE

The remote comes with a complete library of pre-
programmed codes. After you have set up the
remote for your device, you may find that there
are one or more keys that you had on the original
remote control, which do not have a place on your
remote's keypad.
The remote includes a Learning Feature so you
can add functions that are unique to your home
entertainment devices (e.g., VCR Tracking Up or
Down). The custom keys (M1 – M4) have been
provided for this feature. If you need to learn
more than four functions per mode (max. approx-
imately 25 functions), place the function on
another key.
However, there are some considerations:
• Your original remote controls must be in work-
ing order for the Learning Feature to work
properly.
• Learned keys are mode specific, so each one can
store a unique function for each mode.
• Learned keys can be used in Macros (see Using
Macros on page 34).
• You can use any key for learning, except device
keys, P, SCREEN and FAV SCAN.
• Once you program a key, the original function
will be overwritten.
• For optimum learning, avoid high levels of
ambient light such as natural sunlight or energy-
efficient fluorescent lights.
NOTE: P
LEASE HAVE YOUR ORIGINAL REMOTES AVAILABLE WHILE USING
L
THE EARNING
ONDS OF THE PREVIOUS ENTRY
MUST PRESS THE DESIRED KEY AGAIN
E : T
XAMPLE
FROM YOUR ORIGINAL
M4
KEY OF YOUR REMOTE
1. Place the remote and your original remote con-
trol on a flat surface. Make sure the ends that
you normally point at your device are facing
each other. Point the original remote to the
front left side of the remote (see picture below).
Keep the remotes at a distance of no more than
1 to 2 inches apart.
F . B
EATURE E SURE TO PRESS EACH KEY WITHIN
,
O COPY THE
TV
1
INCHES
OR THE REMOTE TIMES OUT
.
" /
MONO STEREO
REMOTE CONTROL ONTO THE
.
2
TO
The Learning Feature 31
U ' G
SER S
5
SEC
,
AND YOU
"
FUNCTION
UIDE
-