Using Commercial Skip; Using The Default Settings; Programming Commercial Skip - Radio Shack 15-2138 Owner's Manual

USING COMMERCIAL SKIP

The RadioShack 8-in-One Remote includes a unique feature for skip-
ping past commercials on recorded programs when using a PVR
(DVR) or VCR. This features works in the CBL, SAT, VCR, or AUX mode
and you can use the default settings or program custom ones.
U T D
SING HE EFAULT
The COM SKIP key is preprogrammed to perform the Commercial Skip
function of your original remote control (if available).
To use the default setting, simply aim the remote at the desired device,
and press COM SKIP once for each skip of two commercials.
P
ROGRAMMING
To customize Commercial Skip settings, perform the following steps:
1. Turn on a desired device (e.g.,VCR or PVR) and view the commer-
cials you want to skip. Then position the media back to the start of
first commercial in the sequence.
2. Press the appropriate assigned device key once (i.e., CBL, SAT, VCR, or
AUX). The selected device key will animate.
3. Press and hold P until the bottom IR segment flashes twice.
The program keys will appear:
4. Press below OTHER once. The Other programming screen will appear:
36 Using Commercial Skip
8- -O
IN
S
ETTINGS
C S
OMMERCIAL
R
NE EMOTE
KIP
P B
OWERED Y
K
AMELEON
.