Setting The Clock - Radio Shack 15-2107 Owner's Manual

BEMý87JJ BEMý87JJ
BEMý87JJ BEMý87JJ
When appears or the remote stops operating
properly, replace the batteries.
Warning: Dispose of old batteries promptly and proper-
ly. Do not burn or bury them.
Caution: If you do not plan to use the remote for a
month or longer, remove the batteries. Batteries can
leak chemicals that can destroy electronic parts.

SETTING THE CLOCK

Note: You must reset the clock each time you replace
the batteries.
1. Hold down for at least 3 seconds.
P
appears.
Note: To exit setup at any time, hold down
for at least 3 seconds.
the last-used mode screen.
2. Touch the down arrow six times until
appears.
Note: If you scroll past
to scroll to it.
3. Touch . The day and time appear and the
SELECT
day flashes.
4. Repeatedly touch the up or down arrows until the
current day appears. Touch
flashes.
5. Repeatedly touch the up or down arrows until the
current hour (and
. The minute digit flashes.
SELECT
6. Repeatedly touch the up or down arrows until the
current minute appears. Touch
flashes.
7. If you made an error, repeat Steps 4–6 to correctly
set the values.
22
;N?J?D= ;N?J?D= ;N?J?D= ;N?J?D=
appears, followed by
9BE9AýI;J 9BE9AýI;J 9BE9AýI;J 9BE9AýI;J
, touch the up arrow
SELECT
7C 7C 7C 7C FC FC FC FC
or ) appears. Touch
SELECT
Preparation
9E:;ý I;J 9E:;ý I;J 9E:;ý I;J 9E:;ý I;J
again
P
9BE9Aý I;J 9BE9Aý I;J 9BE9Aý I;J 9BE9Aý I;J
. The hour
. The day