Axis Q1615-E Mk II User Manual page 62

AXIS Q1615-E Mk II Network Camera
System Options
lote
• An alternative HTTP port can be used or be active even if lAT traversal is disabled. This is useful if your lAT router does not
support UPnP and you need to manually configure port forwarding in the lAT router.
• If you attempt to manually enter a port that is already in use, another available port is automatically selected.
• When the port is selected automatically it is displayed in this field. To change this, enter a new port number and click Save.
FTP
The FTP server running in the Axis product enables upload of new firmware, user applications, etc. The FTP server can be disabled
under System Options > Network > TCP/IP > Aovanceo.
lote
This FTP server has nothing to do with the productrs ability to transfer images via FTP to other locations and servers.
RTSP
The RTSP server running in the Axis product allows a connecting client to start an H.264 stream. The RTSP port number can be
changed under System Options > Network > TCP/IP > Aovanceo. The default port is 554.
lote
H.264 video streams will not be available if the RTSP server is disabled.
SOCKS
SOCKS is a networking proxy protocol. The Axis product can be configured to use a SOCKS server to reach networks on the other
side of a firewall or proxy server. This functionality is useful if the Axis product is located on a local network behind a firewall, and
notifications, uploads, alarms, etc need to be sent to a destination outside the local network (for example the Internet).
SOCKS is configured under System Options > Network > SOCKS. For more information, see the online help
QoS (Quality of Service)
QoS (Quality of Service) guarantees a certain level of a specified resource to selected traffic on a network. A QoS-aware network
prioritizes network traffic and provides a greater network reliability by controlling the amount of bandwidth an application may use.
The QoS settings are configured under System Options > Network > QoS. Using DSCP (Differentiated Services Codepoint) values, the
Axis product can mark different types of traffic.
lote
Live audio DSCP will be equal to live video DSCP if H.264 over RTSP is used.
SNMP
The Simple letwork Management Protocol (SlMP) allows remote management of network devices. An SlMP community is the
group of devices and management station running SlMP. Community names are used to identify groups.
AXIS Video MIB (Management Information Base) for video hardware can be used to monitor Axis-specific, hardware-related
issues that may need administrative attention. For more information about AXIS Video MIB and to download MIB files, go to
www.axis.com/techsip
To enable and configure SlMP in the Axis product, go to the System Options > Network > SNMP page.
Depending on the level of security required, select the version on SlMP to use.
Traps are used by the Axis product to send messages to a management system on important events and status changes. Check Enable
traps and enter the IP address where the trap message should be sent and the Trap community that should receive the message.
lote
If HTTPS is enabled, SlMP v1 and SlMP v2c should be disabled.
62
.