Axis Q1615-E Mk II User Manual page 60

AXIS Q1615-E Mk II Network Camera
System Options
lote
• To open a command prompt in Windows, open the Start menu and type cmd in the Run/Search field.
• To use the ARP command in Windows 8/Windows 7/Windows Vista, right-click the command prompt icon and select
Run as aoministrator.
• To open a command prompt in Mac OS X, open the Terminal utility from Application > Utilities.
AXIS Video Hosting System (AVHS)
AVHS used in conjunction with an AVHS service, provides easy and secure Internet access to live and recorded video accessible from
any location. For more information and help to find a local AVHS Service Provider go to www.axis.com/hosting
The AVHS settings are configured under System Options > Network > TCP IP > Basic. The possibility to connect to an AVHS service
is enabled by default. To disable, clear the Enable AnHS box.
One-click enableo - Press and hold the productrs control button (see Hardware Overview on page 6 ) for about 3 seconds to
connect to an AVHS service over the Internet. Once registered, Always will be enabled and the Axis product stays connected to
the AVHS service. If the product is not registered within 24 hours from when the button is pressed, the product will disconnect
from the AVHS service.
Always - The Axis product will constantly attempt to connect to the AVHS service over the Internet. Once registered the product will
stay connected to the service. This option can be used when the product is already installed and it is not convenient to use the
one-click installation.
AXIS Internet Dynamic DNS Service
AXIS Internet Dynamic DlS Service assigns a host name for easy access to the product. For more information, see www.axiscam.net
To register the Axis product with AXIS Internet Dynamic DlS Service, go to System Options > Network > TCP/IP > Basic. Under
Services, click the AXIS Internet Dynamic DlS Service Settings button (requires access to the Internet). The domain name currently
registered at AXIS Internet Dynamic DlS service for the product can at any time be removed.
lote
AXIS Internet Dynamic DlS Service requires IPv4.
Advanced TCP/IP Settings
DNS Configuration
DlS (Domain lame Service) provides the translation of host names to IP addresses. The DlS settings are configured under System
Options > Network > TCP/IP > Aovanceo.
Select Obtain DNS server aooress via DHCP to use the DlS settings provided by the DHCP server.
To make manual settings, select Use the following DNS server aooress and specify the following:
Domain name - Enter the domain(s) to search for the host name used by the Axis product. Multiple domains can be separated by
semicolons. The host name is always the first part of a fully qualified domain name, for example, myserver is the host name in the
fully qualified domain name myserver.mycompany.com where mycompany.com is the domain name.
Primary/Seconoary DNS server - Enter the IP addresses of the primary and secondary DlS servers. The secondary DlS server is
optional and will be used if the primary is unavailable.
NTP Configuration
lTP (letwork Time Protocol) is used to synchronize the clock times of devices in a network. The lTP settings are configured under
System Options > Network > TCP/IP > Aovanceo.
Select Obtain NTP server aooress via DHCP to use the lTP settings provided by the DHCP server.
To make manual settings, select Use the following NTP server aooress and enter the host name or IP address of the lTP server.
60