Axis Q1615-E Mk II User Manual page 48

AXIS Q1615-E Mk II Network Camera
Events
Triggers
Available action rule triggers and conoitions include:
• Applications – Use installed applications to trigger the rule. See Applications on page 40.
- nMD3 – Trigger the rule when AXIS Video Motion Detection detects a moving object. See AXIS Video Motion
Detection.
• Detectors
- Auoio Detection – Trigger the rule when audio is detected. See Aidio Detection on page 38.
- Day/Night Mooe – Trigger the rule when the product switches between day mode (IR cut filter on) and night
mode (IR cut filter off). This can for example be used to control an external infrared (IR) light connected
to an output port.
- Live Stream Accesseo – Trigger the rule when any stream is accessed and during edge storage playback.
This can for example be used to send notifications.
- Shock Detection – Trigger the rule when the Axis product detects it has been tilted or hit. See Shock Detection
on page 38.
- Tampering – Trigger the rule when tampering is detected. See Aboit camera tampering on page 38.
• Haroware
- Network – Trigger the rule if network connection is lost or restored. This can for example be used to start
recording to the SD card.
- Temperature – Trigger the rule if the temperature falls outside or inside the operating range of the product. This
can for example be used to send maintenance notifications.
• Input Signal
- Digital Input Port – Trigger the rule when an I/O port receives a signal from a connected device. See I/O
Ports on page 66.
- Manual Trigger – Trigger the rule using the Manual Trigger button in the Live View page. See Controls on
the Live View Page on page 15. This can for example be used to validate actions during product installation
and configuration.
- nirtual Inputs – can be used by a VMS (Video Management System) to trigger actions. Virtual inputs can, for
example, be connected to buttons in the VMS user interface.
• PTZ
- Moving – Trigger the rule when the camera view moves due to a PTZ operation. This can for example be used
as an additional condition to prevent an action rule triggered by motion detection to record video while the
camera view moves due to a PTZ operation.
- Preset Reacheo – Trigger the rule when the camera stops at a preset position. This can be for example be used
with the Send Images action to upload images from the preset position.
•
Storage
- Disruption – Trigger the rule if storage problems are detected, for example if the storage device is unavailable,
removed, full, locked or if other read or write problems occur. This can for example be used to send maintenance
notifications.
- Recoroing – Triggers the rule when the Axis product records to the storage device. The recording status trigger
can be used to notify the operator, for example by flashing LED lights, if the product has started or stopped to
record to the storage device. lote that, this trigger can be used only for edge storage recording status.
• System
48