Axis T95A00/T95A10 Dome Housing; Safety Rules; Axis Network Cameras - Axis T95A00 Installation Manual

Dome housing
Hide thumbs Also See for T95A00:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

AXIS T95A00/T95A10 Dome Housing

AXIS T95A00/T95A10 Dome Housing
The AXIS T95A00/T95A10 Dome Housing can be used in both indoor and outdoor camera
installations. Follow these instructions to complete the installation of the AXIS T95A00/T95A10
Dome Housing and Axis network camera.
Warning! High voltage - the electrical connection must be made by an authorized electrician.
Please observe relevant national and local regulations for the installation.
"Package Contents" on page 4
"Installation" on page 5
"Technical Specifications" on page 16

Safety Rules

Only qualified technical personnel may install this device.
Disconnect power before any technical work on the appliance.
Do not use old or worn out power cables.
Never make changes or connections that are not shown in this handbook; improper use of
the appliance may cause serious hazard and may damage the product.
Use original spare parts. Non-original spare parts could cause fire, electrical discharge, or
other hazards.
Before installing the device, check the supplied material to make sure it corresponds with
the order specification.
Please retain this document for future reference.

Axis Network Cameras

The AXIS T95A00/T95A10 Dome Housing supports the following camera models:
Camera Model:
AXIS 213 PTZ
AXIS 214 PTZ
AXIS 215 PTZ
AXIS 231D+/232D+
AXIS 233D
Note:
Before you begin, make sure that the AXIS
T95A00/T95A10 Dome Housing package contents, and
the required cables, tools, and documentation are avail-
able. See "Package Contents" on page 4.
Page 3

Advertisement

Table of Contents
loading

This manual is also suitable for:

T95a10

Table of Contents