Mitsubishi Electric FR-E720-0.1K Instructions Manual page 75

PPO TYPE NON SUPPORT SPECIFICATION
Name Bit
PP 0 to 7
IND
IND 8 to 15
68
Page Index :
• If IND = 1 (system environment variable (sev) area ), the PP values specify different
blocks of sev's:
PP = 0 : sev_I, block I
PP = 1 : sev_II, block II (alarm history)
PP = 2 : sev_III, block III
(For details, refer to page 74.)
• If IND is other than 1 (system environment variable (sev) area), set PP to 0.
Parameter Index :
Specifies the area from which Parameter Number (PNU) is being accessed.
(For details, refer to page 73.)
IND = 0: real-time monitor area
IND = 1: system environment variable (sev) area (3 blocks)
IND = 2: normal parameter area
IND = 3: Pr. 900 to calibration parameter (frequency) area
IND = 4: Pr. 900 to calibration parameter (%) area
Definition