Mitsubishi Electric FR-E720-0.1K Instructions Manual page 33

INVERTER SETTING
Pr. 338 Communication operation
Operation
command source
Location
Pr. 339 Communication speed
Selection
command source
Reverse rotation
61 STR
command
62 RES Reset
PU/NET operation
65 X65
switchover
NET-external operation
66 X66
switching
Command source
67 X67
switchover
[Explanation of table]
External : Command is valid only from control terminal.
NET : Command only from communication is valid
Combined : Command from both control terminal and communication is valid.
: Command from either of control terminal and communication is invalid.
—
REMARKS
• The command source of communication is as set in Pr. 550 and Pr. 551.
• The Pr. 338 and Pr. 339 settings can be changed while the inverter is running when Pr. 77 = "2". Note that the setting
change is reflected after the inverter has stopped. Until the inverter has stopped, communication operation
command source and communication speed command source before the setting change are valid.
26
0: NET
0: 1: 2:
NET External External
NET
External
External
External
External
1: External
0: 1: 2:
NET External External
External
Remarks