Mitsubishi Electric FR-E720-0.1K Instructions Manual page 24

(5) For wiring of FR-E720-5.5K (FR-E720-240) or more and FR-E740-11K (FR-E740-230) or more, pass
a cable on the inverter front cover as shown below. If a PROFIBUS communication dedicated cable is
passed through inside the inverter front cover, the bending radius of the cable becomes small, stressing
the cable.
When wiring, take care not to subject the cable to stress.
After wiring, wire offcuts must not be left in the inverter. They may cause a fault, failure or
malfunction.
CAUTION
WIRING
3
17