Connecting A Turntable - Radio Shack MPA-125 Owner's Manual

32-2003.fm Page 6 Tuesday, March 28, 2000 10:45 AM
Notes:
• If your microphone's cord is longer than 20 feet (6.01 meters), we recommend that you
connect it to a balanced jack to reduce signal hum.
• If you connect a microphone to both jacks for
you connect to the unbalanced jack has priority.
• If you connect a microphone to either
amplifier to .
MIC 4

Connecting a Turntable

GND
You can connect a low-level audio input source (such as a magnetic cartridge turntable) to the
and jacks on the back of the amplifier.
L PHONO R PHONO
If you connect a low-level audio input source to the
of the amplifier to
PHONO
To avoid a low-frequency hum, connect your turntable's ground wire (usually black or green) to
the amplifier's terminal.
GND
6
MIC 4
Turntable
PHONE/MIC 4
.
Connections
, , , or
MIC 1 MIC 2 MIC 3 MIC 4
jack, set
PHONO/MIC 4
jacks, set
PHONO PHONO/MIC 4
, the microphone
on the back of the
on the back