Connecting The Power Cord; Hexagon Wrench - Nikon LABOPHOT-2 Instructions Manual

X.ASSEIV]BLY
O Connecting the Power Cord
a nsen the socket of the power cord to the AC npul connector and
plug it into a AC line receptacle (Fig 215).
oWhen the receptac e is not a double-po e ground type, use a plug
c o n v e n n g a d a p t e r ( F i g . 2 1 6 ) .
F i g . 2 1 6
@ Hexagon Wrench
.The hexagon wrench
Take t out as shown
s stored in the back ofthe
r F i g 2 1 1 .
--=l
Fis. 2 17
11
F i s . 2 1 5