Radio Shack PRO-92 Owner's Manual page 52

20-522.fm Page 52 Friday, September 17, 1999 12:46 PM
Note: This scanner cannot set a channel as the priority
channel if the channel's receive mode is
ED .
Follow these steps to program a weather channel as the
priority channel.
1. Press .
WX
2. Select the weather channel you want to program as
the priority channel.
3. Press then press
FUNC
play to the right of the frequency.
To turn on the priority feature, press
(or
Priority ON Priority WX
to a weather channel) appears for about 3 seconds then
P appears. The scanner checks the priority channel every
2 seconds. It stays on the channel if there is activity (or if
it detects a weather alert tone in priority wx mode),
appears and S or M changes to
Notes:
• The WX priority is only for receiving a weather alert.
• When the scanner detects a 1050 Hz tone, the WX
priority activates and you receive a weather alert.
To turn off the priority feature, press
OFF appears on the display and
display.
Note: The priority channel is always active if it is in the
closed mode, regardless of the open or closed setting for
the bank. This means that if the priority channel is PL,
and has a PL code stored for it, the priority function will
not be active unless the priority signal has the matching
PL code.
52
LTR , MOT
. Pri appears on the dis-
PRI
while scanning.
PRI
if you set the priority
P on the display.
.
Priority
PRI
P disappears from the
, or
Pri