Handling Precautions - Fujitsu F-022 User Manual

F-022_E2kou
F-022.book 15 ページ ２０１１年２月２４日 木曜日 午後２時４２分
◆ Handling mobile phones near electronic medical
equipment
WARNING
･ Obey the following rules inside medical facilities.
- Do not bring F-022 terminal into operating rooms (ORs),
intensive care units (ICUs) or coronary care units (CCUs).
- Turn F-022 terminal OFF in hospital wards.
- Turn F-022 terminal OFF in hospital lobbies and corridors if
electronic medical equipment could be nearby.
- If the medical facility has specified zones where use or
possession of mobile devices is prohibited, obey those
instructions.
- If the function to automatically turn ON the power is set, cancel
the setting before turning the power OFF.
･ Turn F-022 terminal OFF in crowded trains or other public places
where pacemaker or defibrillator wearers could be nearby.
F-022 terminal's signals may affect the operation of implanted
pacemakers or defibrillators, and other devices.
Wearers of implanted pacemakers or defibrillators must carry
･
and use F-022 terminal at least 22 cm away from the implanted
device.
F-022 terminal's signals may affect the operation of implanted
pacemakers or defibrillators, and other devices.
When electronic medical equipment other than implanted
･
pacemakers or defibrillators are in use outside of medical
facilities (such as in home care settings), check with the device
manufacturer to determine how the device is affected by
electrical signals.
F-022 terminal's signals may affect the performance of electronic
medical equipment.

1.5 Handling precautions

◆ General
･ F-022 is waterproof/dustproof, however, do not allow water or
dust to seep into F-022 terminal and do not allow accessories or
optional devices to get wet or let dust attach.
- F-022 terminal is provided with waterproofness of IPX5 and
IPX8 (which exceeds IPX7) and dustproofness of IP5X by firmly
closing the external connection jack cap and installing the rear
cover in a locked state, however, it is not complete
waterproofness/dustproofness. Do not install/remove the
battery or do not open/close the external connection jack cap
and rear cover in the rain or with waterdrop or dirt adhered to
them. Water may seep inside and cause corrosion or
malfunction. Also, accessories and optional devices are not
waterproof/dustproof. Malfunctions, which are determined to
be caused by water or dust as result of inspections, are not
covered by the warranty. Since these conditions are outside the
scope of the warranty, a repair, if at all possible, is charged.
Clean F-022 terminal with a dry soft cloth (such as a cloth for
･
eyeglasses).
- The display of F-022 terminal may have been applied special
coating to improve clearness of the color LCD. When cleaning F-
022 terminal, rubbing it roughly with a dry cloth can scratch the
display. Take care when handling the unit, and clean it with a
dry soft cloth (such as a cloth for eyeglasses). Drops of water or
dirt left on the display can cause stains or remove the coating.
- If F-022 terminal is wiped with alcohol, paint thinner, benzine or
detergent, the printing may disappear or color may fade.
15
Chapter 1 Introduction