CLEARING A STORED CHANNEL
If you no longer want a frequency stored in a channel (and you
do not want to replace that frequency with a different one), fol-
low these steps to clear the stored frequency.
1. Press
MAN
2. To select the desired channel number, use the number keys
to enter that channel number (1–200).
3. Press
PGM
4. Press
then
0
000.0000
5. To clear another channel, use the number keys to enter that
channel number (1–200), then press
edly press
Then repeat Step 4.
LISTENING TO THE MARINE BANK
To listen to the marine bank, repeatedly press
appears.
To change the channel manually, press
To scan through the marine bank, hold down
seconds.
MAN
scanning direction, press
To stop scanning the channels, hold down
seconds.
You can select a marine channel directly. When the scanner
stops scanning the marine bank, use the number keys to enter
the two-digit channel number.
LISTENING TO THE WEATHER BAND
To hear your local forecast and regional weather information,
press
. Your scanner begins to scan through the weather
WX
band.
34
to stop scanning.
.
appears.
PGM
. The frequency number changes to
ENT
to indicate the channel is cleared.
until the desired channel number appears.
PGM
disappears and
or
PGM
or
appears. To change the
SCAN
.
again. Or repeat-
until
MRN
BAND
.
or
for about 2
or
for about 2