Monitoring A Stored Channel; Clearing A Stored Channel; Clearing All Stored Channels - Radio Shack PRO-89 Owner's Manual

MONITORING A STORED CHANNEL

You can continuously monitor a specific channel without scan-
ning. This is useful if you hear an emergency transmission on a
channel and do not want to miss any details — even though
there might be periods of silence — or if you simply want to
monitor that channel.
Follow these steps to manually select a channel.
1. Press .
MAN
2. Enter the channel number (1–200).
3. Press again.
MAN

CLEARING A STORED CHANNEL

If you no longer want a frequency stored in a channel (and you
do not want to replace that frequency with a different one), fol-
low these steps to clear the stored frequency.
1. Press to stop searching or scanning.
MAN
2. To select the desired channel number, use the number
keys to enter that channel number (1–200).
3. Press . PGM appears.
PGM
4. Press then
0 ENT
000.0000 to indicate the channel is cleared.
5. To clear another channel, use the number keys to enter
that channel number (1–200), then press
repeatedly press
appears. Then repeat Step 4.

CLEARING ALL STORED CHANNELS

1. Press . PGM appears.
PGM
2. While holding down
appears.
3. Press . The scanner clears all channels. Or, if you do
ENT
not want to clear all channels, press
34
. The frequency number changes to
until the desired channel number
PGM
, press
MON/CL
MON/CL
again. Or
PGM
.
0 ALL Ch0000
.