Radio Shack PRO-79 Owner's Manual page 30

Note: You can use the scanner's delay feature while using di-
rect search.
1. Press
MAN
point) you want to use as a starting point for the search.
Note: To start from a frequency already stored in one of
your scanner's channels, press
channel number, then press
2. Hold down
–d– , SRCH
Notes:
• To reverse the search direction at any time, hold down
or for about 1 second.
• To search up or down the selected band in small incre-
ments (5, 12.5, or 25 kHz steps), repeatedly press
.
• To pause the search, press
ing, hold down
• To quickly move up or down through the frequencies, hold
down
until you release
3. When the scanner finds an active frequency, it stops
searching and displays the frequency's number. To store the
displayed frequency in the lowest available channel, press
then
PGM ENT
the scanner stores the displayed frequency. The scanner
continues to search for frequencies.
Notes:
• If there is no empty channel,
more frequencies, you must clear some channels. See
"Clearing a Stored Channel" on Page 34. To continue
searching after
or .
30
then enter the frequency (including the decimal
or for about 1 second to search up or down.
, and or appear.
or .
or . The scanner tunes through the frequencies
or
. The channel and frequency flash twice, and
Ch-FULL
and enter the desired
MAN
again.
MAN
or . To resume search-
.
Ch-FULL
appears, press and hold down
appears. To store
or