Listening To The Monitor Memory; Moving A Frequency From The Monitor Memory To A Channel - Radio Shack PRO-28 Owner's Manual

20-508.fm Page 25 Wednesday, August 4, 1999 1:50 PM

LISTENING TO THE MONITOR MEMORY

The scanner has one monitor memory. You can use this memory to
temporarily store a frequency while you decide whether to store it into a
channel. This is handy for quickly storing an active frequency when you
search through an entire band. Once you have temporarily stored a fre-
quency into the scanner's monitor memory, you can listen to it by press-
ing then
MANUAL MON/0
MOVING A FREQUENCY FROM THE
MONITOR MEMORY TO A CHANNEL
Follow these steps to move a frequency stored in the monitor memory
to a permanent channel.
1. Press .
MANUAL MAN
2. Enter the number for the channel where you want to store the
monitor frequency. The channel number appears on the display.
3. Press . The frequency currently assigned to that channel
MANUAL
appears.
.
appears on the display.
25