Using Dtmf Auto Send - Radio Shack HTX-242 Owner's Manual

Using DTMF Auto Send

If you turn on the DTMF auto-send feature, the HTX-242 automat-
ically sends the sequence stored in the currently-selected DTMF
memory every time you press PTT.
Follow these steps to turn on auto send.
1. Press
2. Hold
3. Press
4. Repeatedly press
5. Press
6. Press
To temporarily turn off auto send, press
the display. To turn off auto send, set the option to
Notes:
•
!
•
.
VFO
for at least 1 second.
F
.
MR
to select the
, or press or
TUNE UP DOWN
option to .
on
or PTT to save the setting.
MR
so is on the display.
DTMF
DTMF
This feature works with the DTMF page feature. If you stored a
sequence in DTMF Memory 0, the HTX-242 does not pass trans-
missions to the speaker until it receives that sequence. After the
transmission, DTMF squelch is still turned on.
If there is no sequence stored in DTMF Memory 0, the HTX-242
still transmits the currently selected DTMF memory sequence
each time you press PTT, but passes all transmissions to the
speaker.
flashes.
FUNC
option. Then rotate
dA
on the microphone, to set the
so
DTMF
DTMF
oFF
is not on
in Step 4.
35