Table of Contents
Advertisement
Ô
Ô
NOTE
When you stop playing a disc, the
Travel Theater remembers where
you stopped. When you press
g
PLAY
to start playing the disc
again, the Travel Theater picks up
where you left off unless you press
D
STOP
, eject the disc, or turn off
the Travel Theater.
14
5. Adjust
to a comfortable listening level.
VOLUME
6. To stop playing a disc, press
7. Press
to remove the disc from the player.
EJECT
8. To turn off the Travel Theater, press
P
TV C
ROGRAMMING
º
1. Press
.
POWER
2. Press
on the remote or
TV/DVD/AUX
Travel Theater to select TV mode.
3. Press
on the remote to select regular
TV/CATV
broadcast TV or cable TV (Standard Cable, HRC
Cable, and IRC Cable).
4. Press
AUTO MEMORY
Travel Theater. All available channels are searched
and tuned. Channels with signals detected are
automatically stored.
5. Repeatedly press
SKIP/SEARCH
If
is on, when you use d
SKIP
to scroll through channels, the TV stops only on
channels that were stored into memory. If
the TV searches and stops at all available channels.
6. To manually store a TV channel, tune to that channel
and press
ERASE/WRITE
appears on the screen.
To erase a channel from memory, tune to that channel
and press
ERASE/WRITE
MEMORY ERASE
appears on the screen.
WATCHING TV
e on the Travel Theater or
1. Press d
CHANNEL
on the remote to tune to the desired channel. You can
also use the number buttons to manually enter the
channel number.
2. To adjust the volume, press d
Theater or
VOL +/ VOL–
D . Ô
STOP
º
POWER
HANNELS
on the
TV/AUX
on the remote or
PROG.
to turn
on or off.
SKIP
e or
CHANNEL
CH+/CH–
SKIP
MANUAL MEMORY ADD
until
MANUAL
on the remote until
e on the Travel
VOLUME
on the remote.
.
on the
is off,
CH+/CH–
Advertisement
Table of Contents
