12
C
ONNECTING TO
You can power the Travel Theater using the supplied 12V,
2.5A AC adapter.
1. Turn the "feet" on the bottom of the Travel Theater
counterclockwise to remove them
2. Remove the Travel Theater from the carrying case, and
position the stand so it supports the Travel Theater on a
flat surface.
3. Connect the supplied AC adapter's barrel plug to the
Travel Theater's
DC 12V
4. Insert the AC plug to a standard AC outlet.
Cautions:
You must use a Class 2 or ITE power source
!
that supplies 12V DC and delivers at least
2.5A. Its center tip must be set to positive and
its plug must fit the Travel Theater's
an adapter that does not meet these specifications
could damage the Travel Theater or the adapter.
AC P
OWER
jack.
jack. Using
DC 12V