Table of Contents
Advertisement
Ô
Ô
NOTE
• Some TVs do not have an RCA
or S-Video jack, they only have a
coaxial antenna jack. In this
case, you must purchase an RF
modulator (not supplied,
available at your local
RadioShack store).
• When you connect the DVD
player to a TV, the DVD player's
display and speakers remain on.
To turn off the display, slide OFF/
ON under the screen to OFF.
• You may turn the DVD player's
volume to the minimum level
when listening to the TV's
speaker.
12
If not, match the supplied cable's yellow connector to
the VIDEO connection, red to AUDIO RIGHT, and white
to AUDIO LEFT.Ô
C
ONNECTING TO A
You can also connect the DVD player to a TV and to a
stereo amplifier to enjoy high quality stereo sound.
1. Connect the supplied A/V cable's two-plug end to the
OUTPUT VIDEO / AUDIO
player.
2. Connect the supplied A/V cable's three-plug end to an
A/V cable (not supplied). Connect the yellow (VIDEO)
cable to VIDEO IN on your TV. Connect the red
connector (AUDIO RIGHT) and white connector
(AUDIO LEFT) to your A/V receiver.
TV
A
AND
MPLIFIER
jacks on the back of the DVD
Advertisement
Table of Contents
