Temporarily Printing With Black Ink; Temporarily Printing With Black Ink - Control Panel - Epson WF-C5710 Series User Manual

User's Guide
accordance with its specifications. The Epson warranty does not cover the cost of this replacement. It is a user-
serviceable part.
Note:
When it is full, you cannot print until the maintenance box is replaced to avoid ink leakage. However, non-printing features
are available.
Related Information
"Maintenance Box Handling Precautions" on page 160
&

Temporarily Printing with Black Ink

When color ink is expended and black ink still remains, you can use the following settings to continue printing for
a short time using only black ink.
❏ Type of paper: plain papers, Envelope
❏ Color: Grayscale
❏ EPSON Status Monitor 3: Enabled (for Windows only)
Because this feature is only available for approximately five days, replace the expended ink supply unit as soon as
possible.
Note:
❏ If EPSON Status Monitor 3 is disabled, access the printer driver, click Extended Settings on the Maintenance tab, and
then select Enable EPSON Status Monitor 3.
❏ The available period varies depending on the usage conditions.

Temporarily Printing with Black Ink - Control Panel

1. When a message is displayed prompting you to replace the ink supply units, tap Proceed.
A message is displayed telling you that you can temporarily print with black ink.
2. Check the message, and then tap Proceed.
3. If you want to print in monochrome, select No, remind me later.
The ongoing job is canceled.
4. Now you can copy originals or print received faxes on plain paper in monochrome. Select the feature you want
to use on the home screen.
Replacing Ink Supply Units and Other Consumables
161