About This Guide
This guide provides an overview of the Alcatel-Lucent 7705 Service Aggregation Router
SAR-A chassis, recommendations for preparing the site, procedures for installing and
grounding the router in a standard 19-inch utility rack, and instructions for connecting and
provisioning the router.
After the hardware installation process is completed, refer to the
Publications
Line Interface (CLI) information to configure system and network parameters.
7705 SAR-A Chassis Installation Guide
below for details on the boot process, software configuration, and Command
Note: This manual generically covers Release 7.0 content and may contain some content
that will be released in later maintenance loads. Please refer to the 7705 SAR OS 7.0.Rx
Software Release Notes, part number 3HE10099000xTQZZA, for information on features
supported in each load of the Release 7.0 software.
Note:
In Release 7.0, support for the following hardware has been deprecated:
•
CSMv1
•
7705 SAR-F
•
8-port Ethernet Adapter card, version 1
•
16-port T1/E1 ASAP Adapter card, version 1
These components are no longer recognized in the release.
Preface
List of Technical
11