General Network Security Guidelines; Additional Security Tips; Advanced Configuration; How To Access The Web-Based Utility - Cisco RMN302 Instructions Manual

Wireless-n broadband home router
Table of Contents

Advertisement

Login Screen
8
DRAFT - 6/25/2010

General Network Security Guidelines

Wireless network security is useless if the underlying network is not secure.
• Password protect all computers on the network and individually password protect
sensitive files.
• Change passwords on a regular basis.
• Install anti-virus software and personal firewall software.
• Disable file sharing (peer-to-peer). Some applications may open file sharing without
your consent and/or knowledge.

Additional Security Tips

• Keep wireless routers, access points, or gateways away from exterior walls and
windows.
• Turn wireless routers, access points, or gateways off when they are not being used (at
night, during vacations).
• Use strong passphrases that are at least eight characters in length. Combine letters
and numbers to avoid using standard words that can be found in the dictionary.
Web:
For more information on wireless security, visit www.linksysbycisco.com/security

Advanced Configuration

To configure the Router, use its web-based utility. This chapter describes each web page
of the utility and each page's key functions. You can access the utility via a web browser on
a computer connected to the Router.
Note:
If your service provider supplied you with the Router, then it may be pre-configured
for you, and you will not need to make any changes. Contact your service provider for more
information.
The web-based utility has these main tabs: Setup, Wireless, Storage, Security, Parental
Control, Applications & Gaming, Administration, Status, and Advanced. Additional tabs will
be available after you click one of the main tabs.

How to Access the Web-Based Utility

To access the web-based utility, launch the web browser on your computer, and enter the
Router's default IP address, 192.168.1.1, in the Address field. Then, press Enter.
A login screen appears. The first time you open the web-based utility, use the default user
name and password, admin and password. (You can set a new user name and password
from the Administration tab's Management screen.) Click OK to continue.
Note:
If the Router was supplied by your service provider, then it may restrict access to the
web-based utility. Contact your service provider for the login information.

Advertisement

Table of Contents
loading

Table of Contents