On A Desk Top - Radio Shack ET-687 Owner's Manual

43-687.fm Page 7 Friday, August 13, 1999 11:12 AM

On a Desk Top

1. Insert the bracket's tabs into the
base's upper tab slots as shown,
then press down on the bracket's
clips and insert them into the clip
slots.
Clips
Upper Tab Slots
2. To connect the phone to a two-line
phone jack , plug one end of the sup-
plied two-line phone cord into the
jack on the back of the
TEL LINE 1/2
phone. Route the cord through the
strain-relief slot on the bracket.
Note: If you connect the phone to a
two-line phone jack with a two-line
cord, do not connect a cord to the
jack or the phone might
TEL LINE 2
not operate properly.
To connect the phone to two one-
line phone jacks , plug one end of
the supplied two-line cord to the
jack, and plug another cord
LINE 1/2
(not supplied) into the
jack. Route both cords through the
strain-relief slot on the bracket.
Clip Slots
To connect the phone to a single
one-line phone jack , plug one end of
the supplied cord into the
1/2
cord through the strain-relief slot on
the bracket.
3. Insert the supplied AC adapter's
barrel plug into the
the back of the base.
4. Route the adapter's cord through
Strain
Relief
the strain relief slot on the bottom of
Slot
the bracket.
5. Plug the adapter into a standard AC
outlet.
TEL
TEL LINE 2
or jack. Route the
TEL LINE 2
DC IN 9V
Strain
Relief
Slot
TEL LINE
jack on
Strain
Relief
Slot
7