Connecting And Charging The Battery Pack - Radio Shack ET-548 Owner's Manual

43-1048.fm Page 7 Tuesday, August 17, 1999 12:45 PM
3. Plug the supplied AC adapter's barrel
plug into the
DC 12V
of the base.
4. Plug the adapter into a standard AC
outlet. The IN USE/CHARGE indica-
tor lights when the keypad is on the
base.
5. Lift the base's antenna to a vertical
position.
CONNECTING AND
CHARGING THE BATTERY
PACK
The ET-548 comes with a rechargeable
nickel-cadmium battery pack in the re-
mote keypad. You must connect and then
charge the battery pack for at least 15
hours before you use it the first time.
1. Use a Phillips screwdriver to remove
the screw that secures the battery
compartment cover, then remove the
cover.
Illustration
2. Slide the battery pack's connector
jack on the back
3. Replace the cover and secure it with
4. To charge the battery pack, place the
onto the connector pins inside the
battery compartment.
Illustration
the screw.
remote keypad on the base. The IN
USE/CHARGE indicator on the base
lights.
Illustration
7