Memory Dialing; Storing A Number In Memory - Radio Shack ET-548 Owner's Manual

43-1048.fm Page 14 Tuesday, August 17, 1999 12:45 PM

MEMORY DIALING

You can store up to 10 numbers of up to
16 digits.
Notes:
• To keep your accounts secure, we
recommend you do not store your
personal access code for services
such as bank-by-phone in a memory
location.
• When storing numbers for special
services (such as alternate long dis-
tance or bank-by-phone), store the
service's main phone number in one
memory location and numbers for ad-
ditional information in other locations.

Storing a Number in Memory

1. With the TALK/LOW BATT. indicator
off, press
MEMORY
Illustration
Note: If you do not press any button
on the keypad within about 10 sec-
onds, a buzz sounds and the phone
14
.
exits the number storing process.
Start again from Step 1.
2. Dial the number you want to store.
3. Press MEMORY again.
4. Press the memory location number
(0–9) where you want to store the
number. A long beep sounds, and the
phone number is stored in memory.
5. Pull out the memory index card at the
bottom of the base and write the
stored number next to the memory
location number. We recommend you
use a pencil in case you want to
change it later.
Illustration
Notes:
• If you receive a call while you are
storing a number in memory, press
to answer the call. Af-
TALK/HANG UP
ter the call, begin again at Step 1.