Chain Dialing; Testing Stored Emergency Numbers - Radio Shack ET-543 Owner's Manual

43-1043.fm Page 14 Tuesday, August 17, 1999 10:36 AM
2. Press s/t to search for
SCROLL
the desired stored number. The
selected number appears on the
display.
3. Press . The phone dials the
ENTER
stored number.
Method 3
1. With set to
POWER
key not lit, press
TALK
to search for the desired stored
number.
2. Press . The phone dials the
TALK
number automatically.

Chain Dialing

When storing numbers for special ser-
vices (such as alternate long distance
or bank-by-phone), store the service's
main phone number in one memory lo-
cation and numbers for additional in-
formation in other memory locations.
To chain dial memory numbers, follow
these steps.
1. With the handset's power on,
press and the memory-
MEMORY
location number for the service's
main number.
appear.
14
Testing Stored
and the
ON
Emergency Numbers
s/t
SCROLL
If you store an emergency service's
number (police, fire, ambulance) and
you want to test the stored number,
make the test call during the late
evening or early morning to avoid peak
demand periods. Remain on the line to
explain the reason for your call.
The numbers
2. Wait for the service to answer.
Note: If you use pulse dialing to
dial the service, be sure you have
stored a (tone) entry in the mem-
*
ory location you use to send the
additional information.
3. Press and the numbers
MEMORY
for the memory location where the
additional information is stored.
The numbers appear.
4. To disconnect the call, press
so the key does not light.
TALK
TALK