Installation; Selecting A Location - Radio Shack ET-1112 Owner's Manual

43-1112.fm Page 5 Monday, September 13, 1999 5:08 PM

INSTALLATION

SELECTING A LOCATION

You can place the phone's base on a
desk top or table, or mount it on a wall.
Select a location that is:
• near an accessible AC outlet
• near a telephone line jack
• out of the way of normal activities
• away from electrical machinery,
electrical appliances, metal walls or
filing cabinets, wireless intercoms,
alarms, and room monitors
• away from other cordless phones
The base's location affects the hand-
set's range. If you have a choice of sev-
eral locations, try each to see which
provides the best performance.
Caution: The supplied RadioShack AC
adapter was designed specifically for
your ET-1112. Use only the supplied
adapter.
On a Desk Top
Follow these steps when you place the
base on a desk, shelf, or table.
1. Plug one end of the supplied long
modular cord into the
on the back of the base.
2. Plug the modular cord's other end
into a modular phone line jack.
3. Insert the supplied AC adapter's
barrel plug into the
the back of the base.
4. Route the adapter's cord through
the strain relief slot on the base.
5. Plug the adapter into a standard AC
outlet.
6. Lift the base's antenna to an upright
position.
On a Wall Plate or Wall
jack
TEL LINE
1. Plug one end of the supplied short
modular cord into the
on the back of the base as in "On a
Desk Top," Step 1.
2. Insert the supplied AC adapter's
barrel plug into the
in "On a Desk Top," Step 3.
jack on
DC IN 9V
jack
TEL LINE
jack as
DC IN 9V
5