On/Off; Turning Caller Id/Call Waiting; Storing Your Area Code - Radio Shack 43-3820 Owner's Manual

5 "#
'66+0) 761
Your phone is preset so you must press
to answer a call. With Auto Talk turned on,
FLASH
you can answer a call by just lifting the handset
from the baseor cradle. Auto Talk is independent in
each handset. You can set each handset differently.
1. Lift the handset and hold down
the setup menu appears.
2. Press
CH/SEL
Ed Ed Ed Ed E\\ E\\
E\\ E\\
or appears.
3. To clear the screen when you finish, press
or return the handset to the base or cradle.
6 "%
740+0) #..'4
9 "1
#+6+0) 0
If you have Call Waiting and Caller ID service, you
can set the system to show Caller ID information for
an incoming call even while you are on the phone.
1. Lift the handset and hold down
the menu appears.±
or 9 9 9 9 to select
2. Press
2
Waiting).
3. Press
CH/SEL
Waiting setting.
4. Press and return the handset to the base
END
to store the new setting.
5 ";
614+0) 174
You can store your local area code in the phone's
Caller ID record so the area code does not appear if
the received call is from your local area. If for some
reason you need to dial the area code (or store it in
memory), you can add it afterwards. See "Adding/
Deleting the Area Code" on Page 24.±ý
"6
#.-
CID/MENU
to change the Auto Talk setting.
"+&1%
#..
11
((
CID/MENU
9?:9Mý 9?:9Mý
9?:9Mý 9?:9Mý
(Caller ID/Call
to change the Caller ID/Call
Ed Ed Ed Ed E\\ E\\
E\\ E\\
or appears.
"# "%
4'# 1&'
TALK/
until
END
"
until
Turning Caller ID/Call
Waiting On/Off
This setting must be made
from HS1. The CIDCW
menu does not appear on
HS2.

Storing Your Area Code

• If your calling area
• The area code setting is
± ±
"016'" "
requires 10-digit dialing
(including area code), do
not enter the area code.
independent in each
handset. You can set
either handset to a
different area code.
13