Table of Contents
Advertisement
RUGGEDCOM WIN5237
Installation Guide
Figure 10: Folding Back the Foil
1. Foil 2. Twisted-Pair Wires 3. Drain Wire
4.
Bend the drain wire back over the jacket.
Figure 11: Bending the Drain Wire
1. Foil 2. Drain Wire 3. Twisted-Pair Wires
5.
Partially untwist each wire pair, making sure to retain a half twist at the end.
Figure 12: Untwisting the Wire Pairs
6.
Arrange the wires according to the following pin-out description:
Assembling the PoE Connector
1
1
3
Installing the Subscriber Station
2
3
2
Chapter 2
19
Advertisement
Table of Contents
