Radio Shack CT-600 Owner's Manual page 56

17-1105.fm Page 56 Wednesday, July 21, 1999 11:06 AM
Erase deletes the stored information. To verify
that you want to do this, press
ERASE? prompt. Or, press
want to erase the stored information.
5. The phone prompts
QUENCE . Press
OK
press or to exit the menu.
CLR END
Press or to scroll through these four dial-
ing sequence options, and press
one:
Access No. +Phone No. +Card No.
Use for cards that require you to enter a 1-800
access number first, followed by a phone num-
ber after you hear a tone, then a card number
after another tone.
Access No. +Card No. +Phone No.
Use for cards that require you to enter a 1-800
access number first, followed by a card number
after you hear a tone, then a phone number af-
ter another tone.
10xxx +Phone No. +Card No.
cards that require you to enter an access num-
ber (beginning with 10, then 3 digits), followed
by a phone number after you hear a tone, then
a card number after another tone.
56
at the
OK
if you don't
CLR
SELECT DIALING SE-
to change the setting. Or,
to choose
OK
—
—
— Use for