Ringing Tone - Radio Shack CT-600 Owner's Manual

17-1105.fm Page 53 Wednesday, July 21, 1999 11:06 AM
Notes:
• If you select silent service or vibrate, the phone
displays
SILENT
progress and when you are not using another
function.
• To use the Ring+Vibra or Vibrate settings, you
must use the supplied vibrating battery (Ra-
dioShack Cat. No. 23-1024).

RINGING TONE

Follow these steps to view the current ring tone set-
ting and select from six different tones that your
phone can sound when it receives a call.
1. Press then
MENU
SETTINGS . Press
2. Press or until you see
and the current setting. Press
change it. Or, press
menu.
3. Press or to move the pointer to the ringing
tone you want to use. As you scroll through the
settings, the phone rings so you can hear each
tone. Press to select and store the setting.
OK
when there is no call in
or until you see PHONE
.
OK
RINGING TONE
if you want to
OK
or to exit the
CLR END
53