Radio Shack CT-600 Owner's Manual page 20

17-1105.fm Page 20 Wednesday, July 21, 1999 11:06 AM
"Calling Line ID" on Page 46), the phone auto-
matically displays the calling party's phone
number or, if it is programmed into your phone,
the calling party's name (see "Storing a Number
and Name in Memory" on Page 68).
• If you selected silent service (see "Ringing Op-
tions" on Page 52), the phone does not ring. In-
stead, the keypad and display backlights flash,
flashes on the display (or caller informa-
CALL
tion appears), and the phone beeps once.
• If keyguard is set to ON (see "Turning Keyguard
On/Off" on Page 38), you can answer a call
only by pressing
SEND
To end the call, press
END
information (if any) from the display, press
If you do not answer a call, the phone displays
MISSED CALLS (where NN is the number of calls)
and stores the caller's number (if available) in the
missed calls list. To review the missed calls list,
press then press
OK
numbers. Or, press any other key (except
clear the display. See "Using the Call Log" on
Page 23.
20
.
. To clear calling line ID
.
CLR
NN
or to scroll through the
) to
PWR