Specifications - Makita BHP343 Instruction Manual

ENGLISH (Original instructions)
1-1. Red indicator
1-2. Button
1-3. Battery cartridge
2-1. Star marking
3-1. Switch trigger
4-1. Reversing switch lever

SPECIFICATIONS

Capacities
-1
No load speed (min
Blows per minute (min
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for impact drilling in brick, concrete
and stone as well as for drilling without impact in wood,
metal, ceramic and plastic.
Noise
The typical A-weighted
according to EN60745:
Model BHP343
Sound pressure level (L
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Model BHP453
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB (A)
Wear ear protection
Vibration
The vibration total
determined according to EN60745:
Explanation of general view
5-1. Speed change lever
6-1. Adjusting ring
6-2. Action mode changing ring
6-3. Graduation
6-4. Arrow
7-1. Adjusting ring
Model
Concrete
Steel
Wood
Wood screw
Machine screw
High (2)
)
Low (1)
High (2)
-1
)
Low (1)
Overall length
Net weight
Rated voltage
noise level determined
) : 80 dB (A)
pA
) : 83 dB (A)
pA
) : 94 dB (A)
WA
value (tri-axial vector
BHP343
10 mm
10 mm
25 mm
5.1 mm x 63 mm
211 mm
1.4 kg
D.C. 14.4 V
ENE039-1
Model BHP343
Work mode: impact drilling into concrete
Vibration emission (a
Uncertainty (K) : 2.5 m/s
ENG905-1
Work mode: drilling into metal
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Model BHP453
Work mode: impact drilling into concrete
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode: drilling into metal
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
ENG900-1
with another.
The declared vibration emission value may also be
•
sum)
used in a preliminary assessment of exposure.
3
7-2. Action mode changing ring
7-3. Graduation
7-4. Arrow
8-1. Sleeve
9-1. Blow-out bulb
BHP453
13 mm
13 mm
36 mm
6 mm x 75 mm
6 mm
0- 1,300
0 - 400
0 - 19,500
0 - 6,000
232 mm
1.7 kg
D.C. 18 V
2
) : 10.0 m/s
h,ID
2
2
) : 2.5 m/s or less
h,D
2
2
) : 10.0 m/s
h,ID
2
2
) : 2.5 m/s or less
h,D
2
ENG901-1